Untitled Page

Upper Structure Product Groups

General Qualities

Technology of Dizayn Oxy Plus boiler pipes is a three patented system completely developed by Dizayn Group. These pipes are the composit structure of PPR pipes. The pipe consists of two PPR layers with equal wall thickness and aluminum foil between these layers. Located in the middle of wall thickness, sticker on and under aluminum foil, adhesion of foil and PPR layer has been provided. The reasons why aluminum foil pipes are preferred in installations are as follows;       

1. Pressure resistance in high temperatures

2. Less thermal expansion

3. Oxygen Insulation

Quailities above are at the highest level in oxy plus boiler pipe than other stable pipes.

Advantages

DİZAYN OXY PLUS BOILER DOES NOT REQUIRE TRIMMING.

Benzersiz teknolojisiyle alüminyum folyonun et kalınlığının tam ortasına alındığı, Dizayn Oxy Plus Boiler Pipe which is taken in the middle of wall thickness of aluminum foil with its unique technology, it has removed the process of peeling foil called trimming. Dizayn has removed time loss and muscle fatigue of plumber, the nervous breakdown because of the second required process to remove the foil left on the surface of pipe and can not be removed by trimming.    

DİZAYN OXY PLUS BOILER EXTENDS THE LIFE OF INSTALLATION.

In an installation made using Foil Pipe, oxygen permeability value required by DIN 4726 Standard can only be provided with oxy plus boiler.  

Oxygen permeability is under 0,1 g/m3xday level proposed by DIN 4726 Standard because Dizayn Oxy Plus Boiler Pipe and parts inside fitting. In other foil pipes, oxygen entering into the system through polypropylene polymer chains in foil free parts reaches water. Dissolved oxygen within water connects with oxygen metal parts. Iron oxide, rust, occurs with chemical reaction as a result of connection. Corrosion continues with continuous oxygen entrance and it causes depletion of radiators and boilers, malfunction of pumps and energy loss.

Dizayn Oxy Plus Boiler Pipe is oxygen molecule proof and corrosion does not occur in the system. Heating system works with yield of first day.

DİZAYN OXY STABLE PIPE DOES THE MINIMUM EXPANSION.

While fluid passing through the foil free pipe at 80 °C temperature elongates 10.8 at 1000 mm, Dizayn Oxy Plus Boiler Pipe elongates 1 mm under 1000 mm under the same conditions.

Clamps used at regular intervals fix the pipes. Foil free pipe which can not find enough area to extend when hot water passes forms visual pollution by deflection between the clamps.The pipe which can not elongate 10 mm forms 40 mm deflection. Dizayn Oxy Plus Boiler pipe does not form deflection.

DİZAYN OXY PLUS BOILER PIPE THE BEST ADHESIVE LAYER PIPE.

Thanks to the patented process of Dizayn, adhesive layer correlate a chemical and physical link with both layer made of PP-R 80 and aluminum foil. It provides 15 N tear strength value required by German  DVGW W534 with % 400 more.    

DİZAYN OXY PLUS BOILER PIPE DOES NOT SHRINK.

Because short parts of Oxy Plus Boiler Pipes can be used easily, wastage is minimized. Pipe waste is prevented.

DİZAYN OXY PLUS BOILER PIPE IS AESTHETIC.

Because foil is in the middle, visible colour is not grey but completely white. However, because upper layer is too thin in available stable pipes, aluminum grey colour reflects outer surface as grey. Dizayn Oxy Plus Boiler pipes provides the same colour harmony with connecting parts and does not form visual image distortion.

DİZAYN OXY PLUS BOILER PIPE DIAMETER MESUREMENTS ARE APPROPRIATE FOR STANDARDS.

The fact that foil in known foil pipes and pprc layer thickness on it are added to standard diameter value and produced causes pipe outer diameter measurement has a non-standard diameter measurement. Because Dizayn oxy plus boiler foil is in the middle, the only foil pipe which has no non-standard diameter measurement. Oxy plus boiler pipe which has standard diameter measurements takes up less storage volume and does not require special clamps during mounting.  

DİZAYN OXY PLUS BOILER PIPE PREVENTS FAULTS IN WELDING.

That foil is left on outer surface is one of the advantages of trimming process in other oxy stable pipes. That prevents welding problems experienced when the itgoes beyond the standard value of pipe outer diameter. Oxy plus boiler pipe always provides proper welding.

A THREE PATENTED SYSTEM.

Oxy plus boiler pipe is a 3 patented system with its Correction Apparatus and Dizayn Special Welding Threader.