Untitled Page

Infrastructure Product Groups

Dizayn Corrugated Spiral Pipe

Sewage pipes are products manufactured from Polyproylene and Polyethylene raw material within Polyolefin group. While extruded corrugated pipe is produced from polyethylene and polypropylene raw material till Ø450 mm diameter, spiral corrugated pipes are manugactured from polyethylene. Because the value of ring resistance in the same wall thickness is higher in polyproylene, it is more commonly preferred. Pipes with Ø500 mm diameter and more are produced with spiral method.  Dizayn group has corrugated spiral pipe producing technology  till 8.000 mm diameter.

While extruded corrugated pipes are joined with fittings, spiral corrugated pipes are with socket and spigot end, there is no need for fitting to join flat pipe.

Spiral corrugated pipes can be joined with electrofusion method as well as extruder welding, sealed method. This joining method makes pipes used under 0,5 bar pressure normally usable even in 4 bar. Thus pipes continue to work without leaking and being damaged in joining parts in case of increase in pressure encountered in rains turning into flood. 

Corrugated pipes are sold with 50 year lifetime warranty as they are not affected by corrosion, wear and its chemical resistance is high. They fulfill their activities without being affected by eafrth shakes such as earthquake thanks to their flexible structure. Because tightness is provided for pipe life, contamination of undergroung water and soil can be prevented. The pipe is not choked by tree roots.

Production Features

Corrugated pipes have two different methods. They are manufactured on mandrel with extruder and spiral method in only one process without stopping. Production capacity of extruded corrugated pipes and ring resistance value is stable as the shape of the product can not be changed. Spiral corrugated pipes can be manufactured in optimum weight in required ring resistance value depending on the project.

Pipes consist of two layers, pipe layer inside and ribbed layer outside. The layer inside is the pipe with flat field carrying the fluid. Outer layer is in ribbed structure. Both layers are connected to each other as molecular. As the empty ribbed structure outside can carry load nearly as full structure according to physics rules, it is preferred to save raw material and decrease the weight of pipe.   

Extruded corrugated pipes get out of the extruder in two layers and the outer layer is shaped with molds. In spiral corrugated pipe, firstly the inner pipe are tubed by wrapping polyethylene in strips on top of the other on mandrel . Following that the product pulled as profile is wrapped onto the pipe and welding is ensured. Both products show monolithic feature with their welded structures.