Untitled Page

Upper Structure Product Groups

Advantages, Where and How to Use

DİZAYN OXY PLUS BOILER PIPE DO NOT REQUIRE TRIMMING.

Dizayn Oxy Plus Boiler Pipe, where aluminum foil is taken to the middle of wall thickness, with its unique technology eliminated peeling process called as trimming. Dizayn eliminated loss of time, muscle fatigue and nervous disorder caused by removal of remaining foil which could not be removed by trimming with a second process.

DİZAYN OXY PLUS BOILER PIPE EXTENDS THE LIFE OF INSTALLATION.

Oxygen permeability value required by DIN 4726 in an installation by aluminum foil can only be provided by oxy plus boiler pipe.

Because parts inside the fitting have foil with Dizayn Oxy Plus Boiler Pipe, oxygen permeability is under the level of 0,1 g/m3xday required by DIN 4726 Standard. Oxygen entering the system through polypropylen polymer chains in foil free zones in other pipes with foil reaches water. Oxygen being carried and solved within water contacts with metal part. As a result of contact iron oxide, rust occurs with chemical reaction. Corosion continues due to continuity of oxygen permeability and causes depletion of radiators, boilers, mulfunction of pumps and energy consumption.

Dizayn Oxy Plus Boiler are oxygen mlecules proof and corosion does not occur within the system. Heating system works with efficiency in the first day.

DİZAYN OXY STABLE PIPE DOES MINIMUM EXPANSION.

While fluid in 80 C, passing through the foil free pipe, is elongating 10.8 mm in 1000 mm, Dizayn Oxy Plus Boiler elongates 1mm in 1000 mm under the same conditions.

Clamps used at regular intervals fix the pipes. Foil free pipe which can not find sufficient space to elongate when hot water passes, makes deflection and creates visual pollution. The pipe which can not elongate 10 mm makes deflection

DİZAYN OXY PLUS BOILER IS THE PIPE WITH THE BEST ADHESIVE LAYER.

Thanks to patented production process of Dizayn, the adhesive layer makes chemical and physical connection with both layer manufactured from PP-R 80 and aluminum foil. It provides 15 N tear strength value required by German DVGW W534 standard with % 400 extra.  

DİZAYN OXY PLUS BOILER PIPE IS NOT REDUCED BY WASTAGE.

Because short parts of Oxy Plus Boiler Pipes can be used easily, amountof wastage is minimized. <pipe waste is prevented.

DIZAYN OXY PLUS BOILER IS AESTHETIC.

Because foil is in the middle in Dizayn Oxy Plus Boiler pipes,  visible colour is not grey but full white. However, because upper layer is too thin in available stable pipes, grey colour of aluminum shows the outer layer as grey. Dizayn Oxy Plus Boiler pipes provides the same tonality with additional parts thanks to this feature of Dizayn Oxy Plus Boiler pipes and does not create image distortion aesthetically.

DIAMETER MEASUREMENTS OF DİZAYN OXY PLUS BOILER PIPE ARE IN COMPLIENCE WITH STANDARDS.

Production of foil in known pipes with foil and layer thickness of pprc on it by adding to Standard diameter value causes outer diameter measurement of pipe to have nonstandard value. Dizayn oxy plus boiler pipe is the sole pipe with foil which does not have nonstandard diameter measurement because foil is in the middle. Oxy plus boiler pipe which has standard diameter measurements covers less storage volume and does not require special clamp during mounting.  

DİZAYN OXY PLUS BOILER PIPE PREVENTS MAKING MISTAKE IN WELDING.

Remaining foil on outer surface which is the disadvantage of trimming process in other oxy stable pipes prevents welding problems experienced when pipe outer diameter measurement gets out of Standard value. Oxy plus boiler pipe ensures proper welding all the time.

A 3 PATENTED SYSTEM.

Oxy plus boiler pipe is 3 patented system with Butt Trimming Apparatus and Special Welding Threader.

 

Where and How to Use?

Why to Use:

There are 2 reasons for using Butt Trimming Apparatus

1. Correcting alnının of pipes with oblique and preparing before welding.

2. In application of Oxy Plus Boiler Pipe, removal of foil in pipe butt in a way that it forms 2 mm depth.

Advantages;

1. It has patented special design.

2. It can be used with electrical household appliances.

3. It is small and light. It does not tire the plumber.

4. It is economic (Stable stripping tool is % 500 more expensive).

5. It minimizes user mistakes (flattens pipe butt with oblique cut, there is no remaining foil on outer surface, does not effect outer diamater measurement of the pipe)

6. It is long lasting.

DİZAYN SPECIAL WELDING THREADER

1. It has patented special design.

2. It optimizes heating period.

3. It prevents welding lip (diameter shrinks). Disadvantages of welding lip are as follows.

a. The formation of sound,

b. Decrease in thermal efficiencies,

c. Increase in fuel costs, reduction in the life of pumps,

d. need to select bigger pump because of increase in hydrolic losses in central systems,

e. Customer complaints because of not heated radiators.

4. Oxy is used in stable and foil free pprc pipes.

5. It provides continuous proper welding.

6. Because pipe butt is closed, a smooth tansitions occurs as shown in the figure below when welding is performed. Thanks to this, pressure drops of fluid shall be less than the situation with flat butt.